Gateway 9315 Uživatelský manuál Strana 68
- Strana / 168
- Tabulka s obsahem
- ŘEŠENÍ PROBLÉMŮ
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
63
www.gateway.com
5 Press the SPACEBAR to select the array. The Logical Drive Configuration screen opens.
6 Select the physical drives to associate with the current array, then press the SPACEBAR.
7 Set the RAID level for the logical drive by highlighting RAID and pressing ENTER. The
available RAID levels for the current logical drive are shown.
8 Select a RAID level, then press ENTER.
9 Set the RAID logical drive size and stripe size.
10 When you have defined the current logical drive, select Accept, then press ENTER.
11 Repeat Step 7 through Step 10 to configure additional logical drives.
12 Save the configuration when prompted, then press ENTER to return to the Management
menu.
13 Select Initialize from the Management menu.
14 Use the SPACEBAR to highlight the logical drive to initialize, then press F10.
15 Select Yes at the prompt, then press ENTER to begin initialization. A graph will show
the progress of the initialization process.
16 When the initialization process is complete, press ESC to return to the previous menu.
17 Exit the RAID Configuration utility and reboot the server.
Caution Initializing the RAID array destroys any data on the hard drives in the
selected array.
- User Guide 1
- Contents 2
- Chapter 1 6
- Control panel 7
- I/O panel 8
- Interior 9
- System board 10
- Connectors - left side 11
- Getting Help 12
- Chapter 2 14
- Setting up the hardware 15
- Surge protectors 16
- Line conditioners 16
- ■ Server rails (2) 18
- ■ Cabinet rails (2) 18
- ■ Fastener pack (1) 18
- Disk guide screw hole 20
- Disk guide screw 20
- Disk guide 20
- Nut bar or mounting nuts 22
- Installing the bezel 23
- Starting your server 25
- Turning off your server 27
- Initial hardware settings 29
- Chapter 3 30
- Caring for your server 31
- Cleaning the keyboard 32
- Cleaning the screen 32
- Preparing for system recovery 33
- System administration 34
- NTER. The password 35
- Identifying your server 36
- Updating the FRU/SDR 37
- ■ Install hardware drivers 38
- ■ Install programs 38
- ■ View server documentation 38
- Chapter 4 40
- Selecting a place to work 41
- Gathering the tools you need 41
- Opening the server case 43
- Closing the server case 44
- Removing the air baffle 47
- Installing the air baffle 49
- Installing a CD or DVD drive 55
- Removing a CD or DVD drive 57
- Filling empty drive bays 69
- Installing memory 70
- Memory online sparing 71
- To install or replace memory: 72
- Replacing a system fan 80
- Installing a processor 81
- Replacing the power supply 85
- Replacing the CMOS battery 89
- Replacing the control panel 91
- Replacing the system board 93
- Chapter 5 96
- 2 Select one of these menus: 97
- Updating the BIOS 98
- Recovering the BIOS 99
- To recover the old BIOS: 100
- To manually recover the BIOS: 100
- Resetting the BIOS 102
- Resetting BIOS passwords 103
- Chapter 6 106
- Telephone support 107
- Tutoring and training 108
- Safety guidelines 109
- Error messages 110
- Memory size error 111
- Missing operating system 111
- System Event Log Full 111
- Troubleshooting 112
- Beep codes 113
- LED information 115
- Diagnostic LEDs 115
- POST code checkpoints 116
- Diagnostic LED decoder 118
- G=Green, R=Red, O=Orange 118
- Description 118
- DIM code checkpoints 122
- ACPI runtime checkpoints 122
- CD drive 123
- Diskette drive 123
- Expansion cards 124
- Hard drive 124
- Internet 125
- Keyboard 125
- Modem (telephone dial-up) 125
- The color is not uniform 127
- Processor 128
- Appendix A 130
- System specifications 131
- System board specifications 132
- Environmental specifications 133
- Additional specifications 134
- Appendix B 136
- 1 Restart your server 137
- Security 144
- Server (Cont’d) 147
- BIOS submenu BIOS 2nd level 151
- Setting Value 151
- Appendix C 152
- Important safety information 153
- United States of America 155
- FCC declaration of conformity 156
- Industry Canada (IC) 156
- Laser safety statement 158
- All Rights Reserved 159
- Trademark Acknowledgments 159
Související produkty a manuály pro Hardware Gateway 9315
Hardware Gateway ALR 8200 Uživatelský manuál
(52 stránky)
(52 stránky)
© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.077 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce